83
Setup (PC)
PC Software
Installing the PANA LINK software!
1Start Windows 95 or Windows 98 and close all
applications.
2Insert the included CD into your CD-ROM
drive.
≥The language dialog box will appear.
Select the desired language that you use
with this software. Then click [OK].
4Follow the instructions on the screen until all
files have been installed.
5Be sure to read a README file for more
information.
≥The README file contains the following
information:
1. Install/uninstall PANA LINK for Windows
95/98.
2. Install/uninstall KX-FLM600/650 for
Windows 3.1.
3. Print and Scan from Windows 3.1.
4. How to feed recording paper manually.
5. How to use Help.
6. Acrobat Reader
7. ECP Problems
3The installation will automatically start.
≥If the language dialog box does not appear:
The installation will automatically start.
≥If the language dialog box does not appear
and the installation does not start
automatically:
Click Start, choose Run... . Type “d:\setup”
(where d: is the drive letter of your CD-ROM
drive). Click OK.
(If you are not sure what the drive letter is for
your CD-ROM drive, please use Windows
Explorer and look for the CD-ROM drive.)
Note:
≥For detailed instructions on PANA LINK software, use the Help function.
≥The screens shown in these instructions are from Windows 95.
Windows 3.1 or 3.11 users:
≥If you are using Windows 3.1 or 3.11, follow these steps to install the software.
1. From the Program Manager, click File, choose Run... .
2. Type “d:\setup” (where d: is the drive letter of your CD-ROM drive).
3. Click OK.
≥The printer driver only is available. Please read a README file (README.WRI) in the CD-ROM for more
information.