FACE DOWN
JOG DIAL
STOP
SET
Display
FAX START
RESOLUTION
36
Sending Faxes
1Insert the document FACE DOWN.
If necessary, press
repeatedly to select the desired setting
(p. 30).
2Rotate until the following is
displayed.
Display:
3Press .
4Rotate until the desired name
is displayed.
Example:
5Press .
To program other stations, repeat steps 4
and 5 (up to 20 stations).
6Press after programming all
of the desired stations.
The document will be fed into the unit and
scanned into memory. The unit will then
transmit the data to each station, calling
each number sequentially.
After transmission, the stored document will
be erased automatically, and the unit will
automatically print a broadcast sending
report (p. 39).
FAX START
DIR=Bill [001]
SET
Bill [000]
JOG DIAL
DIR= [000]
SET
<ONE TIME BROAD>
JOG DIAL
RESOLUTION

One time broadcast transmission!

This feature is useful for sending the same document to selected parties whose fax numbers are
stored in the JOG DIAL directory. If you only wish to send a document once, select the parties
for each transmission.
Before programming, make sure that the desired stations have been stored in the JOG
DIAL directory (p. 20).
Note:
If you select the “FINE”, “SUPER FINE” or
“HALF TONE” resolution, the number of
pages that the unit can transmit will decrease.
If one of the stations is busy or does not
answer, the station will be skipped. All
skipped stations will be redialed up to 2 times
after all of the other stations have been
called.
To cancel the broadcast setting
1. Press while the unit displays the following
message.
Display:
The display will show the following.
2. Press .
SET
YES:SET/NO:STOP
SEND CANCELED?
BROADCASTING
STOP