See pages 44 and 45 for details.
1. Follow steps 1–3 above.
2.
Rotate to select “YES”.
3. Press .
4. Press again.
5. Press .
MENU
SET
SET
JOG DIAL
“TAD/FAX”: Telephone Answering
Device/Facsimile mode (p. 50)
“FAX ONLY”: Facsimile only mode
(p. 43)
“TEL/FAX”: Telephone/Facsimile
mode (p. 44, 45)
If you select “TEL/FAX”, the unit
will print an information list.
Code Display & Feature Settings How the unit operates
Features Summary
68

Programming table (cont.)

#78 If you use an extension telephone
in the TEL/FAX mode, select the
desired number of rings to be
generated before the unit answers.
TEL/FAX RING
1, 2, 3, 4
#80 To reset the advanced features to
their default settings
SET DEFAULT
YES
NO
You can confirm the status of the
other party’s machine.
If the ring back tone continues, the
other party’s machine may not be
a facsimile or may have run out of
paper. Check with the other party.
The connecting tone volume
cannot be adjusted.
#76
If you often have trouble when
sending a fax, this feature allows
you to hear connecting tones; fax
tone, ring back tone and busy tone.
CONNECTING TONE
ON
OFF
#77
To change the receive mode in the
AUTO ANSWER setting
AUTO ANSWER
TAD/FAX
FAX ONLY
TEL/FAX
(The pre-selected setting is in bold type.)
Advanced features (cont.)!
How to set menu options
1. Press .
2. Rotate until the following is displayed.
Display:
Press and rotate until the desired
feature is displayed.
3. Press .
4. Rotate until the desired setting is displayed.
5. Press .
6. Press .
MENU
SET
JOG DIAL
SET
JOG DIAL
SET
ADVANCED MODE
JOG DIAL
MENU
Note:
Step 4 may be slightly
different depending on the
feature.
See page 62 for more details.