“TONE”: For tone dial service.
“PULSE”: For rotary pulse dial
service.
This setting is also available after
activating the FAX ONLYmode
(p. 43).
See page 13 for details.
“VOX”: Unlimited
“1 MIN”: Up to 1 minute
ID = 111
63
Features Summary
Basic features!

Programming table

Code
#01 To set the date and time
SET DATE & TIME
mm/dd/yy
hh:mm
(2 digits for
each entry)
See pages 14 and 15 for details.
See page 16 for details.
“ERROR”: The sending report will
be printed only when fax
transmission fails (p. 32).
“ON”: The sending report will be
printed after every transmission.
#02
To set your logo
YOUR LOGO
(Up to 30
characters)
Display & Feature Settings How the unit operates
#03 To set your facsimile telephone
number
YOUR FAX NO.
(Up to 20
digits)
#04 To print and check the sending
report for fax transmission results
SENDING REPORT
ERROR
ON
OFF
#13 If you cannot dial, change the
setting depending on your
telephone line service.
DIALING MODE
TONE
PULSE
(The default setting is in bold type.)
1. Follow steps 1–3 on page 62.
2. Enter any 3–digit number except a
number using 0 or 7.
3. Press .
4. Press .
MENU
SET
VOX
1 MIN
#06
To change the number of rings
before the unit answers a call
in the FAX ONLYmode
FAX RING COUNT
1, 2, 3, 4
To change the number of rings
before the unit answers a call
in the TAD/FAX mode
TAD RING COUNT
1, 2, 3, 4
TOLL SAVER
RINGER OFF
#10 To change the recording time for an
incoming message
RECORDING TIME
To operate the answering device
from a remote location
REMOTE TAD ID
#11
This setting is also available after
activating the TAD/FAX mode.
See page 50 for details.