To send a document:
1. Insert the document.
2. Follow steps 1–3 above.
3. Rotate to select “ON”.
4. Press .
5. Enter the fax number.
6. Press .
7. Enter the transmission start time.
Press to select “AM” or “PM”.
8. Press .
9. Press .
To cancel after programming,
press then
.
SET
STOP
MENU
SET
SET
SET
JOG DIAL
“ON”: The unit will print the journal
report automatically after every 30
new fax communications (p. 32).
“NEXT FAX”: For the next
attempted fax transmission. After
transmission, the unit will return to
the previous setting.
“ERROR”: When previous fax
transmission fails and you redial
the same number.
This feature is not available for
broadcast transmission.
The calling charge may be higher.
Features Summary
64
How to set menu options
1. Press .
2. Rotate until the following is displayed.
Display:
Press and rotate until the desired
feature is displayed.
3. Press .
4. Rotate until the desired setting is displayed.
5. Press .
6. Press .
MENU
SET
JOG DIAL
SET
SET
ADVANCED MODE
JOG DIAL
MENU

Programming table

Code
#22
To print the journal report
automatically for fax communications
AUTO JOURNAL
ON
OFF
#23
If you have difficulty sending an
overseas fax, activate this feature
before starting transmission. This
feature makes sending documents
easier as the transmission speed is
slowed down.
OVERSEAS MODE
Display & Feature Settings How the unit operates
#25
To send a fax automatically at a
specified time.
This allows you to take advantage
of low-cost calling hours offered by
your telephone company.
The setting can be reserved to
take place up to 24 hours in
advance.
DELAYED SEND
NEXT FAX
ERROR
OFF
ON /
fax no. /
hh:mm
OFF
(The default setting is in bold type.)
Advanced features!
Note:
Step 4 may be slightly
different depending on the
feature.
See page 62 for more details.