74
Operations
For fax advantage assistance, call 1-800-435-7329.
Receive mode
Problem
●If you want to set the TAD/FAX, FAX ONLY or TEL/FAX
mode:
— Select the desired mode using feature #77 (p. 68), and
— Press to turn on the arrow (▼) on
the right of the display.
Display:
ON
●If you want to set the TEL mode:
— Press to turn off the arrow (▼) on
the right of the display.
ON
●The unit is not in AUTO ANSWER mode. Press
to turn on the arrow (▼) on the right of
the display.
ON
▼
AUTO ANSWER
AUTO ANSWER
▼
AUTO ANSWER
Cause & Remedy
I cannot select the desired
receive mode.
The other party complains that
they cannot send a document.
Fax – receiving (cont.)
Problem
●
Some paper has instructions recommending which side to
print on. Try turning the paper over. We recommend smooth
paper such as Hammermill Jet Print for clearer printing.
●Check the document of the other party.
●If a blank sheet is ejected after the received document is
printed out, the receiving reduction rate is not
programmed correctly. Program the proper rate in feature
#36 (p. 65).
●The other party placed the document in their fax machine
the wrong way. Check with the other party.
R
Cause & Remedy
The printing quality is poor.
A blank sheet is ejected.
Copying
Problem
●You cannot make a copy during programming. Make the
copy after programming or stop the programming.
●The glass or rollers are dirty. Clean them (p. 80).
Cause & Remedy
The unit does not make a copy.
A dirty pattern or a black line
appears on the copied
document.
(continued)