Panasonic KX-HNB600 Wi-Fisettings, Downloading the Home Network app, AC adaptor connection

Setup

Note:

RUse only the supplied Panasonic AC adaptor PNLV236.

RA microSD card (not supplied) is required to record images from cameras. Refer to the information about the available microSD card (page 3).

RTo remove the microSD card, push in the microSD card and then remove it.

	4
3
4
	5
1
2
6
2	1

Note about power connections

AC adaptor connection

RThe AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.)

RThe AC adaptor should be connected to a vertically oriented or floor-mounted AC outlet. Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of the adaptor may cause it to become disconnected.

Power failure

RThe hub will not work during a power failure.

RThe hub’s telephone features will not work during a power failure. We recommend connecting a corded-type telephone that does not use an AC adaptor to your telephone line. You can connect the telephone to the same telephone line jack as the hub by using a Panasonic T-adaptor (page 3).

Wi-Fi®settings

After you have connected your hub, here is what you will need to do in order to access the system from your mobile device. Each procedure is explained in this chapter.

1Download

Download the [Home Network] app to your mobile device.

2Initial setup

Use the [Home Network] app to configure the hub to connect to your wireless router, and then register your mobile device to the hub.

Downloading the [Home

Network] app

Download information is available at the web page listed below.

www.panasonic.net/pcc/support/tel/

homenetwork/

For assistance, please visit www.panasonic.com/support 11