Setup
Using registration buttons
1Hub:
Press and hold the registration button until the LED indicator blinks in green. R Press and hold the appropriate
registration button (page 10) according to the device you want to register.
M
HANDSET/LOCATORN: For handsets
M
CAMERAN: For cameras
M
OTHER DEVICEN: For sensors and smart plugs
2Handset:
Place the handset on the charger.
Devices other than handset:
Press and hold the device’s registration button until the device’s LED indicator blinks in green.
R When registration is complete, the hub sounds one long beep.
Note:
RIf registration fails, the hub sounds several short beeps.
Using the app
1Start the [Home Network] app.
2From the [Home Network] app home screen, tap [Settings].
3Tap [Device Registration].
4 Tap [Registration].
5Select the type of device that you want to register.
6Handset:
Place the handset on the charger.
Devices other than handset:
Press and hold the registration button on the device you want to register until the device’s LED indicator blinks in green.
R When registration is complete, the hub sounds one long beep.
7When prompted, configure the device name and location as desired, and then tap [OK].
Note:
RIf registration fails, the hub sounds several short beeps.
14For assistance, please visit www.panasonic.com/support
