Setup
Information about Wi-Fi communication
The hub uses
Do not use the hub in the following areas or locations. Malfunction or interference to radio communication may result.
RIndoor areas that have certain types of radio or mobile communications equipment
RLocations near microwave ovens or Bluetooth devices
RIndoor areas where antitheft devices or 2.4 GHz frequency devices such as POS systems are used
Do not place the hub in areas where the following materials or objects are located between the hub and the wireless router.
These materials and objects may interfere with wireless communication or cause wireless transmission speed to become slower.
RMetallic doors or shutters
RWalls containing
RWalls made of concrete, stone, brick, or tin
RMultiple walls
RSteel shelving
RFireproof glass
Registering another mobile device
After you have used your mobile device to perform the initial setup procedure, you can add other mobile devices to the system. Before following this procedure, make sure you have completed the Initial Setup procedure.
1Using the mobile device that you want to register, download the [Home Network] app and then start the app.
2Tap [Add Mobile Device].
3When prompted, press
R Your mobile device will be registered to the hub.
4When prompted, follow the
Registering other devices to the hub
This procedure is not required for devices that were included as part of a bundle.
Before you can use cameras, sensors, and smart plugs, they must be registered to the hub.
If you purchased devices separately (i.e., not as part of a bundle), you must register each device to the hub.
You can register each device by using the registration buttons or the [Home Network] app.
For assistance, please visit www.panasonic.com/support | 13 |