3.7.6 ESVM4 Card (KX-TDA0194)Function
4-channel simplified voice message card for Simplified Voice Message feature. Also supports MSG card
features. To be mounted on the OPB3 card.
OPB3 Card
inside
ESVM4 Card
Screws
Accessories and User-supplied Items
Accessories (included): Screws ´ 3
User-supplied (not included): none
CAUTION
When installing/uninstalling an ESVM card, be careful not to damage the chips around the connection
parts. Doing so may cause severe damage to the ESVM card.
Notice
•When replacing an ESVM card, ensure that the status of the OPB3 card is In Service (INS), and then
initialize the ESVM card. For details about the initialization procedure, refer to "2.5.4 Tool—Simplified
Voice Message—Delete All Recording" in the PC Programming Manual.
•When installing an ESVM card for the first time on an OPB3 card that is already installed in the PBX,
do not remove the OPB3 card from the PBX until the card status becomes INS.
•After installing the OPB3 card, with an ESVM card mounted, for the first time, do not remove the
OPB3 card from the PBX until the card status becomes INS.
Note
When using an ESVM card for the SVM feature, it must be mounted on sub-slot 3 (leftmost slot) of the
OPB3 card.
Document Version 2011-10 Installation Manual 87
3.7.6 ESVM4 Card (KX-TDA0194)