7
To avoid machine malfunction, do not use the equipment under the following conditions:
BLiquids near the equipment
BUnstable or unlevel surfaces BDirectly in front of air
conditioning vents
Cautions
BDirect exposure to sunlight
BExtremely high or low temperature
[temperature range: 10˚C to 32.5˚C
(50˚F to 90.5˚F)]
BExtremely high or low humidity
(humidity range: 20% to 80% RH)
BCondensation due to rapid change
of temperature
BAreas of poor ventilation
BAreas of high dust or chemical
fume concentration (solvent etc.)
BToo much media/document
which exceeds the limit mark
( ) on the guide of the tray.
BAny toner other than genuine
Panasonic toner; it may
damage the printer.
Not genuine toner
BDo not use a media for ink jet
(paper, transparency, etc.) that
may be wrapped around the
fuser roller and cause damage.
Ink jet
media

■ Static Electricity Damage

To prevent static electricity damage to any of the following components, touch a grounded metal surface,
such as the printer’s bare metal frame prior to touching the component.
BThe interface connectors : parallel and optional network
BElectrical components, connectors inside the printer and any components on the optional board (RAM
Expansion Board or Ethernet Card)
BThe connector pins on the optional 2nd cassette feeder or auto duplex printing unit for the printer

■ Interface Cable

Always use a shielded interface cable. Use of an unshielded cable can result in radio interference with data.
Before You Start
Setup Guide