Panasonic KX-P8415 Printing on Transparency, Label or Envelope, Using the Printer Panel, Automatic Duplex Printing

20
It is possible to see the following menus to configure
the printer by printing the menu map.
BTest page, Bias Adjustment, Maintenance, Image
Area, Power Saver, Network Protocol Setup*1,
Adjustment to Media, Language.
*1This menu wil not appear if the network card is not
installed in the printer.
To print the menu map,
Press the MENU/EXIT button on the printer
panel. Press the HH/ENTER button.
Press the FF/CONTINUE or GG/CANCEL
button until the Menu Map is displayed. Press
the HH/ENTER button.
The menu map will be printed.
To perform the setting:
Press the MENU/EXIT button to enter the
menu mode.
Set the printer using the following buttons.
Press the MENU/EXIT button to exit the menu
mode.
Display the print window in the application
software.
Select Panasonic KX-P8415 printer and click
Properties.
Click Paper tab.
Select paper size (#), paper source ($) and
media type (%).
BIf transparency tray is used, select
AutoSelect Tray of Paper source.
BIf media is loaded on the multi-purpose tray,
select Multi-purpose Tray of Paper source.
Installing the 2nd cassette feeder with ADU option
enables automatic duplex printing .
Be sure that the Duplex Unit must be added to the
Installed Options on the Option tab in the printer
driver before automatic duplex printing is possible.
Display the print window in the application
software and click Properties.
Display the Setup tab of the Panasonic
KX-P8415 Properties window.
Enable Flip on long edge ( ) or Flip on
short edge ( ).
For the detailed information, refer to the “Settings
and Printing” of the Operating Instructions installed
on your computer.
Printing on Transparency,
Label or Envelope
2
3
4
1
$
#
%
3
1
1
2
2
3
AA
A
A
1
2
Button Operation
Display the next menu or item
G/CANCEL
Increase the numerical value of
the selection by 1 or display the
next selection
F/CONTINUE
Display the previous menu or
item
Decrease the numerical value of
the selection by 1 or display the
previous selection
Enter a sub-menu
Activate a selection
H/ENTER
Using the Printer Panel
Automatic Duplex Printing