19
Caution:
BDo not use a media for ink jet that may be
wrapped around the fuser roller and cause
damage.
■Setting media thickness switch
Because of the most reliable paper-picking for
various media weights, media thickness can be
manually selected.
Open the left side door.
Move the switch to the desired setting.
■Loading Media
Available media size: 91 mm x 254 mm to
216 mm x 356 mm (3.6″x 10″to 8.5″x 14″).
#Open the multi-purpose tray.
$Extend the media support.
Insert the media with theprinting side up into
the multi-purpose tray.
BThe height of media should not exceed the
limit mark on the tray, or it may cause a jam.
Notes:
BPlace only one envelope in the multi-purpose tray
at a time.
BWhen a wrinkle occurs, try printing with the
flap inserted in the envelope as shown in figure.
Switch setting Media
Thin (Default)
Middle
Laser paper 75 to 90 g/m2
(20 to 24 lbs.)
Laser paper 91 to 123 g/m2
(25 to 32 lbs.)
Label, Transparency, Coated paper
Thick Laser paper 124 to 165 g/m2
(33 to 44 lbs.)
Envelope #10
Card stock up to 165 g/m2
Thin Middle Thick
1
2
1
2
Taped side facing down
(3M CG3710)
Transparency
Label
Envelope
Short-end
Print side up
Print side up
Loading Media
Reference Guide
On the Multi-purpose Tray#
$