8
Based on the IEEE P1284-B standard
(An ECP compatible parallel port is recommended for
Windows 95 and Windows 98. To turn on the ECP
mode, use the computer’s BIOS setup. Refer to the
computer’s manual for details.)
System RequirementsPCMinimum Space Requirements
Left Right
Power Source
BThe voltage level of the power source must not
vary more than ±10% from the voltage level
marked on the nameplate (located on the rear of
the unit).
BDo not use an extension cord.
BDo not use a line conditioner, transient suppressor
or surge protector as it may cause a machine
error.
To operate the KX-P8415 system effectively, see
the following:
CPU:
Pentium 133 MHz or greater
Operating System:
Windows®95*1, Windows 98*2 , Windows NT®4.0*3
or Windows 2000*4
RAM:
16 MB or more (More than 32 MB is recommended.)
Free disk space:
100 MB or more
Virtual memory:
16 MB or more (More than 32 MB is recommended.)
Drive:
CD-ROM drive
*1Microsoft®Windows®95 operating system
(hereafter Windows 95)
*2Microsoft®Windows®98 operating system
(hereafter Windows 98)
*3Microsoft®Windows NT®Workstation operating
system, and Microsoft®Windows NT®Server
network operating system Version 4.0
(hereafter Windows NT 4.0)
*4Microsoft®Windows®2000 operating system
(hereafter Windows 2000)
Interface
#45 cm (17.7″)
Multi-purpose tray opening space
$35 cm (13.8″)
Controller board opening space
%50 cm (19.7″)
Media tray opening space
&60 cm (23.6″)
Front cover opening space
#$
%
&