Useful Information
Answering system
Problem
The unit does not record new messages.
I cannot operate the answering system remotely.
The unit does not emit the specified number of rings.
Cause/solution
RThe answering system is turned off. Turn it on (page 35).
RThe message memory is full. Erase unwanted messages (page 37).
RThe recording time is set to “Greeting only”. Change the setting (page 40).
RIf you subscribe to a voice mail service, messages are recorded by your service provider/telephone company, not your telephone. Change the unit’s number of rings setting or contact your service provider/telephone company (page 40).
RThe remote access code is not set. Set the remote access code (page 38).
RYou are entering the wrong remote access code. If you have forgotten your remote access code, enter the remote access code setting to check your current code (page 38).
RThe answering system is turned off. Turn it on (page 39).
RIf the first ring is turned off, the number of rings decreases by 1 from the specified number of rings.
Liquid damage
Problem
Liquid or other form of moisture has entered the handset/base unit.
Caution:
Cause/solution
RDisconnect the AC adaptor and telephone line cord from the base unit. Remove the batteries from the handset and leave to dry for at least 3 days. After the handset/base unit are completely dry, reconnect the AC adaptor and telephone line cord. Insert the batteries and charge fully before use. If the unit does not work properly, contact an authorized service center.
RTo avoid permanent damage, do not use a microwave oven to speed up the drying process.
46For assistance, please visit http://www.panasonic.com/help
