![](/images/new-backgrounds/1309424/30942455x1.webp)
Programming
4*: Select “AM” or “PM”. a MOKN
5Enter the desired hour and minute you wish to end this feature.
6*: Select “AM” or “PM”.
7 MSaveN a MOFFN
Changing the start and end time
1MMenuN (right soft key) #237
2Continue from step 3, “Turning silent mode on/off”, page 27.
Selecting groups to bypass silent mode
1MMenuN (right soft key) #241
2Select your desired groups by pressing 1 to 9.
R “” is displayed next to the selected group numbers.
R To cancel a selected group, press the same dial key again. “” disappears.
3MSaveN a MOFFN
Call block
This feature allows the unit to reject calls when:
–the unit receives a call from a phone number stored in the call block list as unwanted (“Storing unwanted callers”, page 28).
–the unit receives a call without phone number (“Blocking incoming calls without phone number”, page 28).
When a call is received, the unit rings for a short time*1 while the caller is being identified. If the phone number matches an entry in the call block list, the unit emits no sound to the caller, and disconnects the call. (Caller ID subscribers only)
*1 This is called first ring. If you do not want the first ring to sound, turn this setting to “Off” (page 29).
Important:
RWhen the unit receives a call from a number that is stored in the call block list or
a call without a recognized phone number, the call is logged in the caller list
(page 33) with after the call is disconnected.
Storing unwanted callers
You can store up to 100 phone numbers in the call block list.
Important:
RYou must store the phone number with an area code in the call block list.
nFrom the caller list:
1 MCN CID
2 MbN: Select the entry to be blocked. a MDetailN
R To edit the number: MMenuN a MbN: “Edit” a MSelectN Press MEditN repeatedly until the phone number is shown in the
3 MMenuN
4 MbN: “Save CID” a MSelectN
5 MbN: “Call block” a MSelectN
6 MbN: “Yes” a MSelectN
7 Edit the phone number if necessary
(24 digits max.).
8 MSaveN a MOFFN
nBy entering phone numbers:
1 MMenuN (right soft key) #217
2 MMenuN a MbN: “Add” a MSelectN
3 Enter the phone number (24 digits max.).
4 MSaveN a MOFFN
Blocking incoming calls without phone number
You can reject a call when no phone number is provided, such as a call just showing “Out
of area”.
1MMenuN (right soft key) #240
2MbN: Select the desired setting. a MSaveN
28For assistance, please visit http://www.panasonic.com/help