Programming
3MOFFN
Setting the first ring for the call block list
If you do not want the first ring from a number on the call block list to sound, turn the first ring setting to “Off”. The default setting is “On”.
1MMenuN (right soft key) #173
2MbN: Select the desired setting. a MSaveN
3 MOFFN
Viewing/editing/erasing call block numbers
1MMenuN (right soft key) #217
2MbN: Select the desired entry. R To exit, press MOFFN.
3To edit a number:
MEditN a Edit the phone number. a MSaveN a MOFFN
To erase a number:
MEraseN a MbN: “Yes” a MSelectN a
MOFFN
Baby monitor
This feature allows you to listen in on a room where another handset is located, allowing you to easily monitor from different areas of the house or place. The monitored handset (placed in a baby’s room, for example) will automatically call the monitoring handset or the phone number stored when it detects sound.
Important:
RYou should perform a test run of the baby monitor procedure to ensure that the baby monitor feature is set correctly. For example, test its sensitivity. Check the connection if you are diverting the baby monitor to an outside line.
Note:
RIf the unit is connected to a PBX system, you cannot set the baby monitor.
RDuring the monitoring mode, battery consumption is faster than usual. We recommend leaving the monitored handset on the base unit or charger.
RThe monitored handset never rings during the monitoring mode.
Setting the baby monitor
Perform the setting operation with the handset to be monitored (for example, the handset placed in a baby’s room).
To monitor with a handset
The internal baby monitor feature is only available between handsets in the same radio cell.
1MMenuN (right soft key) #268
2 MbN: “On” a MSelectN
3MbN: Select the desired handset number to monitor with. a MSaveN
R “Baby monitor” will be displayed. R The registered handset name/number
is displayed.
Note:
RWhen this feature is on, another handset can hear the monitored handset by making an intercom call.
To monitor from an outside line
nFrom the phonebook:
1 MMenuN (right soft key) #268 2 MbN: “On” a MSelectN
3 MbN: Select “External” to monitor from an outside line. a MEditN a MAddN
4 MbN: “Phonebook” a MSelectN
5 MbN: Select the phonebook entry. a MSelectN
6 MbN: Select the desired phone number. a MSaveN
R “Baby monitor” will be displayed.
For assistance, please visit http://www.panasonic.com/help | 29 |
