System Programming
Least Cost Routing (LCR) Programs (continued)
•LCR Mode
Allows you to turn on or off the Least Cost Routing (LCR) mode. LCR, if enabled, selects the least expensive route to be used for a CO call. Input Format: #80 [A] [B]
•[A]=1: CO1/ 2: CO2
•[B]=0: DISABLE (default)/ 1: ENABLE
•LCR Itemized Bill Code
Assigns whether to register the itemized bill code (extension number 21 through 26) to each CO line or not. This code is used for dividing a bill to a CO line.
Input Format: #86 [A] [B]
•[A]=1: CO1/ 2: CO2
•[B]=0: DISABLE (default)/ 1: ENABLE
•LCR Carrier Code
Assigns each carrier's access code used for the LCR feature.
Input Format: #81 [A] [code] #
•[A]=Route No.: 1 through 4
•[code] =10 digits max.
(Default : all routes – 131)
•BTL Access Code
Stores the BTL (British Telecom Line) access code. When this code is dialled, the BTL is always selected even if the LCR feature is enabled.
Input Format: #87 [code] #
• [code]=4 digits max. (default: 121)
•LCR Modify Mode
Assigns whether to change the numbers after the carrier code to the TONE mode or not when “#01 Dial Type Selection” program is assigned as “Pulse”.
Input Format: #82 [A] [B]
•[A]=Route No.: 1 through 4
•[B]=0: PULSE/1: TONE (default)
•LCR Route Selection Code
Assigns area codes (except the leading digit) which is selected by the LCR feature for each route. You can store a maximum of 40 codes for each route.
Input Format: #83 [A] [BB] [code] #
•[A]= Route No.: 1 through 4
•[BB]= Code No.: 00 through 39
•[code]=6 digits max.
(Default: Not stored)
•LCR Password Set
Assigns a password to register an authorization code. The password is not displayed on the display panel during setting.
Input Format: #84 [old password] [new password]
•[Password]=4 digits max. (default: 1234)
•LCR Authorization Code Set
Registers an authorization code applied to each CO line and each route. The authorization codes are not displayed on the display panel during setting.
Input Format: #85 [password] [A] [B] [code]
•[password]=enter the password set by # 84 program
•[A]=Route No.: 1 through 4
•[B]=1: CO1/ 2: CO2
•[code]=20 digits max.
(Default: both CO lines, all routes – not stored)
•LCR Route Exceptional Code
Assigns dialling numbers that are excepted from LCR routing plans of the specified carrier. You can store a maximum of 20 codes for each route.
Input Format: #88 [A] [B] [code] #
•[A]=Route No.: 1 through 4
•[B]=Area code No.: 00 through 19
•[code]= 6 digits max.
(Default: all routes – not stored)
•LCR Leading Digit Entry
Registers Leading digits of an area code to judge whether to select a route for the LCR feature. When the first digit of the dialled number matches with the registered number, it is considered a long distance call and proceeds to the LCR procedure.
Input Format: #89 [code] #
• [code]=2 digits max. (default: 0)
Conditions
•To clear the LCR route selection code, press #83 [A] [BB] #
•To clear the LCR authorization code, press #85 [password] [A] [B] #
•To clear the BTL access code, press #87#.
•To clear the LCR route exceptional code, press #88 [A] [B] #
31
