|
| Troubleshooting |
Troubleshooting |
| |
| Troubleshooting |
|
|
|
|
| Problem | Description and Solution |
|
|
|
|
|
|
| The PS does not work. | • The battery is drained. |
|
| → Charge the battery fully. (See “Battery Charge” on page 7.) |
|
| • The PS has been cancelled or the PS has not been |
|
| registered. |
|
| → Consult your dealer. |
|
| • The power is OFF. |
|
| → Turn it ON. (See “Power On/Off” on page 8.) |
|
|
|
| The PS does not ring. | • Ringer volume is set to “Off”. |
|
| → Adjust the ringer volume level. (See “Ringer Volume |
|
| Adjustment” on page 13.) |
|
|
|
| You cannot make/receive a call. | • The PS is out of range or the Cell Station (CS) is busy. |
|
| → Move closer to the CS or try again later. |
|
| • The radio channel is busy or a radio communication error |
|
| occurred. |
|
| → Try again later. |
|
|
|
| You cannot dial. | • The number which you dialled is restricted by the |
|
| Business Telephone System. |
|
| → Consult your dealer. |
|
| • The key lock mode is ON. |
|
| → To cancel the mode, press the Joystick for about 2 seconds. |
|
| (See “Key Lock” on page 14.) |
|
| • The radio channel is busy or a radio communication error |
|
| occurred. |
|
| → Try again later. |
|
|
|
| Noise is frequently heard. | → Set the PS and CS away from other electrical appliances. |
|
| → Move closer to the CS. |
|
|
|
| “CS BUSY” is displayed. | • The Cell Station is busy. |
|
| → Try again later. |
|
|
|
| “PS Not Connected” is | • The called PS is out of range or the PS is power off. |
| displayed. | → Try again later. |
|
|
|
| The PS stops working during | → Turn the power OFF and ON, then try again. (See “Power |
| operation. | On/Off” on page 8.) |
|
| → Reinsert the batteries and try again. (See “Battery |
|
| Installation” on page 7.) |
|
|
|
| Two short beeps are heard | • The radio signal is weak. |
| during a conversation. | → Move closer to the CS. |
|
|
|
51
