
Before Operating the PS
PBX Feature Menu
Functions of the PS can be activated through the display key list.
Move the joystick left to display the key list.
1 | 2 | 3 |
0 |
Pause
1
2
3
0
Pause:
Inserts a dialling pause.
FWD/DND:
Sets Call Forwarding or Do Not Disturb.
Message:
Used to leave a message waiting indication or call back the party who left you a message waiting indication.
Search Wave:
Searches the strongest radio signal coming from the Cell Station.
PBX Program:
Enters the PBX programming mode.
Flexible Key Display
A flexible key can be used either to seize a line in order to make or receive an outside call
indicates line status similarly to the LED indicators on a Proprietary Telephone; is the
same as a green LED; is the same as a red LED.
Example:
1:Single Line
2:Trunk Group
3:Loop Line 4:Single Line 5:Single Line
key number
Understanding the Icons for the F-CO key*
(on): You are currently using this line.
(flashing rapidly): You have an incoming call on this line.
(flashing slowly): You have a call on hold on this line.
(on): This line is in use by someone else.
(flashing rapidly): There is an incoming call received by an incoming call distribution group to which “Ring” is set as the group call distribution method.
(flashing slowly): Someone has a call on hold on this line.
(no icon): This line is idle.
•* The meanings of these icons vary depending on the status of the CO line.
•For further information, refer to “LED Indication” in the
•To select a key, press its key number, or move the Joystick to select the
desired key then press .
•To assign a function to a flexible key, see page 46.
11