Special FeaturesSetting the Key Lock
You can lock the handset dialling buttons. Only incoming calls are accepted until the key lock is
cancelled.
When the unit is in the standby mode, press and hold
until a beep sounds.
[X]” is displayed and all dialling buttons are locked.

To cancel the key lock

When the unit is in the standby mode, press and hold for about 2 seconds.
[X]”will disapper and the key lock will be cancelled.
“The key lock will also be cancellled when the power is turned OFF (p. 13).
Base 1 [X]
12.04 15:00
Using the Recall Feature
is used to access special telephone services (optional) such as call waiting. Contact your
telephone company for details.
Users in Australia can access Telstra’s “EASYCALL” service by having the recall time set at
100msec (this is the factory default setting), and then follow Telstra’s “EASYCALL” instructions to
operate this service.
If you are connected via a PBX, a longer or shorter recall time may be necessary to use PBX
functions (transferring a call etc.). Consult your PBX supplier for the correct setting.
R
KX-TCD715ALM-5Basic3 6/20/02 18:47 Page 44