61
Multi-Unit User Operations Chapter 4
5Enter the handset number you want to
cancel.
•The selected handset number(s) flash(es).
•If you misdial, press the number(s) again.
6Press .
•Abeep sounds.
•To return to the standby mode, press
.
Cancelling a Handset
Each handset can cancel itself or another handset.
Make sure that the power is ON (p. 13) and the unit is in the standby mode.
Cancelling a base unit
If another handset is out of range and/or its power is OFF when “Cancelling a Handset”, the previous
base unit number will still remain in the cancelled handset. Therefore, you need to cancel the base
unit registered in the cancelled handset.
1Press .
2Press or until the arrow points to
“Setting Handset”, then press .
3Press or until the arrow points to
“Registration”, then press .
4Press or until the arrow points to
“Cancel Base”, then press .
•“Enter H/set PIN” is displayed.
5Enter the 4-digit handset PIN (p. 55).
•Registered base unit(s) is(are) displayed.
6Press or until the arrow points
to the base unit(s) you want to cancel,
then press .
•“”marks the selected base unit.
7Press .
•“Clear ?” is displayed.
8Press or to select “YES”, then
press .
•Abeep sounds and “CLEARED” is
displayed.
•To return to the standby mode, press
.
1Press .
2Press or until the arrow points
to “Setting Base”, then press .
•“Input Command” is displayed.
3Press .
4Enter the 4-digit base unit PIN (p. 55).
•The current registered handset No. is/are
displayed.
7
Input Command
7 123456
Ex. Thehandset No. 5 is selected.
KX-TCD715ALM-8Multi 6/20/02 18:49 Page 61