46
Direct Call
1Press .
2Press or until the arrow points
to “Setting Handset”, then press
.
3Press or until the arrow points
to “Call Option”, then press .
4Press or until the arrow points to
“Direct Call No.”, then press .
•“<Enter Phone No>”is displayed.
5Enter the phone number up to 24 digits.
•If you misdial, press . The digits are
erased from the right. To erase all digits,
press and hold .
6Press .
7While the arrow is at “Save”, press .
8While the arrow is at “ON”, press .
•Abeep sounds.
C
C
Base 1
10 New Calls
You can easily make a call using a stored direct call number by pressing or . Incoming
calls are accepted. To use this feature, store the direct call number and turn on the mode by
programming. The factory preset is OFF.

Setting the Direct Call Number and Mode

After storing the direct call number, the unit will automatically switch to the direct call mode. When the
direct call mode is on, you can ONLYdial the number stored in the direct call memory.
Make sure that the power is ON (p. 13) and the unit is in the standby mode.
To turn OFF/ON the direct call
mode
Follow steps 1 to 3. In step 4, press or
until the arrow points to “Direct
ON/OFF”, press . Press or to
select OFF or ON and press . When
finished, press .
•When set to off, “ ” will go out.

Dialling the Stored Number

Make sure that “ ” is displayed, then press or .
•The number stored in the direct call memory is dialled automatically.
9Press to return to the standby
mode.
• The handset is now in the direct call
mode.
KX-TCD715ALM-6Advance1 6/20/02 18:47 Page 46