50
1Press .
2Press or until the arrow points
to “Setting Handset”, then press
.
3Press or until the arrow points
to “Time Alarm”, then press .
4Press or until the arrow points
to “Set Alarm Time”, then press
.
The current setting is displayed on the 2nd
line.
5Enter the desired time (hour and munite)
using a 4-digit number (24-hour time),
then press .
Ex: To set 06:30, enter“0630.
6While “Save” is at the arrow, press .
7Press or to select “Once” or
Repeat Daily”.
8Press .
Abeep sounds.
To return to the standby mode, press .
<Enter Time>
_:__
Setting the Time Alarm

To turn off the time alarm

1Follow the steps 1 to 3.
2Press or until the arrow points
to “Alarm ON/OFF”, then press .
3Press or to select OFF, then
press .
Abeep sounds.
To return to the standby mode, press
.

To stop the time alarm

When the alarm sounds and “Time Alarm
is shown on the flashing backlit display,
press any dialling button to , ,
,or.
If “Once” is selected, the setting is
automatically turned off. If “Repeat Daily
is selected, the setting remains and the alarm
will repeatedly sound at the setting time.
If the unit is in the talk, speakerphone or
intercom mode during the alarm time, the
alarm will not sound. After finishing a
conversation, the alarm will start ringing.
9
0
The handset will sound an alarm at a preset time for 30 seconds just for once or repeated daily. You
can also select the ringer type for time alarm (p. 52). If you select the melody for time alarm, the
handset will sound longer (It depends on the ringer type). You must set the date and time before
setting the alarm time.
Make sure that the power is ON (p. 13) and the unit is in the standby mode.
<Enter Time>
06:30
KX-TCD715ALM-6Advance1 6/20/02 18:47 Page 50