For Optional Multi-Unit Users
60
Selecting the Base Unit Access

Automatic base unit access (Auto)

The handset automatically selects a registered base unit.
•When the handset moves to another base unit radio area, it loses contact with the previous base unit
and automatically accesses the new base unit.
•If the handset is in the overlap area between several base unit radio areas, the handset will access a
base unit in the order of the base unit numbers.

Specified base unit access

You can only select one registered base unit (1 to 4) you want to operate.
•You can choose the base unit/telephone line where you can make/receive calls.
The factory preset is Auto (automatic base unit access). To select the desired base unit, program as
follows.
Make sure that the power is ON (p. 13) and the unit is in the standby mode.
1Press .
2Press or until the arrow points
to “Setting Handset”, then press
.
3While “Select Base” is at the arrow,
press .
•The current setting, “Auto” or a
registered base unit number is at the
arrow.
4Press or to select the desired
base unit.
5Press .
•Abeep sounds.
•The selected base unit number will be
displayed.
Select Base
H
Auto
Base1
KX-TCD715ALM-8Multi 6/20/02 18:49 Page 60