Before Initial Use

Charger Wall Mounting

28 mm (1-1/8 in) for charger

1.Install the two included screws in the wall, spacing them 28 mm (1-1/8 in) apart.

28 mm

(1-1/8 in)

Washer

Screws

Drive the screw

to this point.

2.Mount the charger securely on the wall.

Make sure that the wall that the charger will be attached to is strong enough to sup- port the weight of the handset and charger (270 g [0.6 lb]). If not, it is necessary for the wall to be reinforced.

When this product is no longer in use, make sure to detach it from the wall.

Attaching the Belt Clip and Belt Clip Holder

You can attach the handset to your belt by following the steps below.

[To attach]

Allows phone straps and similar objects to be connected.

Slide the clip into the holder until it clicks.

[To remove]

Make sure to turn the handset 180° when you

Remove the belt clip.

take it off.

 

6

Document Version 2007-06

Page 6
Image 6
Panasonic KX-TD7684 Charger Wall Mounting, Attaching the Belt Clip and Belt Clip Holder, To attach, To remove