Using the Handset Phonebook
42 Document Version 2007-06
Entering Characters
Example: To enter “Anne” in Alphabet Mode.
• To switch between uppercase and lowercase, press .
• To enter a character located on the same dialing key as the previous character, move
the cursor by moving the Joystick , then enter the desired character.
• If you enter a different character by mistake, move the Joystick to highlight the
character, press to delete it, then enter the correct character.
• To clear an entire line, press for more than 1 second.
• To move the cursor, move the Joystick .
Entering Characters
You can enter characters and digits using the dialing keys.
You can select one of 3 character modes by pressing the Right Soft Key
while entering a name. The function icon above the soft key displays the
current character mode.
See “Character Mode Table” (page 43) for available characters.
A, a
B, b
C, c
2
To change the character mode while editing a name in the Phonebook, press the Right Soft Key.
Alphabet Numeric Extended