Answering System

Turning on the answering system remotely

If the answering system is off, you can turn it on remotely.

1Dial your phone number from a touch tone phone.

2Let the phone ring 15 times.

3Enter your remote code within 10 seconds after the beep.

LThe unit answers your call with the greeting message.

LYou can hang up, or enter your remote code again and begin remote operation (page 29).

Skipping the greeting message to leave a message

You can leave a message just as any outside caller can. Call your phone number. When the answering system picks up, press {*} to skip the greeting message and record your message after the beep.

Answering system settings

Remote code

A remote code must be entered when operating the answering system remotely. This code prevents unauthorized parties from listening to your messages remotely. The default setting is “111”.

1{MENU}

2{V}/{^}: “Answering device” i {OK}

3{V}/{^}: “Settings” i{OK}

4{V}/{^}: “Remote code” i{OK}

5Enter the desired 3-digit remote code. i{OK} i{OFF}

Ring count

You can change the number of times the phone rings before the unit answers calls.

The default setting is “4 rings”.

Toll saver”: The unit answers on the 2nd ring when new messages have been recorded, and on the 4th ring when there are no new messages. If you call your phone from outside to listen to new messages (page 29), you will know that there are no new messages when the phone rings for the 3rd time. You can then hang up without being charged for the call.

1{MENU}

2{V}/{^}: “Answering device” i {OK}

3{V}/{^}: “Settings” i{OK}

4{V}/{^}: “Ring count” i{OK}

5{V}/{^}: Select the desired setting.

6{OK} i{OFF}

For Voice Mail service subscribers

If you subscribe to a flat-rate service package that includes Caller ID, Call Waiting, Voice Mail, and unlimited local/ regional/long distance calls, please note the following:

LTo use the Voice Mail service provided by your telephone service provider rather than the unit’s answering system, turn off the answering system (page 26).

LTo use this unit’s answering system

rather than the Voice Mail service provided by your telephone service provider, please contact your telephone service provider to deactivate your Voice Mail service.

For assistance, please visit http://www.panasonic.com/help

31

Page 31
Image 31
Panasonic KX-TG1031 Answering system settings, Turning on the answering system remotely, Remote code, Ring count