![](/images/new-backgrounds/1211023/21102343x1.webp)
Base Unit Settings
Base unit settings
L Use the handset to customise the base unit.
L When customising the base unit, the current item or setting is indicated by >.
To customise the base unit:
1{j/OK}
2Press {^} or {V} to select “Base Unit Setup”. i {>}
3Press {^} or {V} to select the desired item in the base unit settings menu. i {>}
4Press {^} or {V} to select the desired item in the
5Press {^} or {V} to select the desired setting then press {>} or follow the instruction in the “Feature” column of the chart.
L To exit the operation, press {ih}.
Base unit settings | Feature (default setting) | |
menu |
|
|
Ringer Volume | — | Base unit ringer volume (Medium) |
Call Options | Recall/Flash | Change the recall time (“100 msec.”).*1 |
| Area Code | page 23 |
| Call Restrict | page 23 |
Other Options | Base Unit PIN | Change base unit PIN (“0000”).*2 |
|
| – Enter the current |
|
| – Enter the new |
|
| {j/OK} |
| Repeater Mode | page 38 |
*1 Change the recall time, if necessary, depending on the requirements of your service provider/telephone company or PBX.
*2 If you change the PIN, please make note of your new PIN. The unit will not reveal the PIN to you.
*3 If you forget your PIN, see page 47.
22