Using an Optional Headset
With the Base Unit
Connecting the headset to the base unit
Connect the headset to the headset jack as shown.
(EXIT)
Headset
Jack
Making/Answering calls
Fasten the headset cord to prevent it from being disconnected.
Hook
1 | Press |
•If you misdial when making a call, press | |
| twice and dial again. |
2 | To hang up, press |
To adjust the headset receiver volume (High, Medium or Low):
While using the headset, press Ñ or Ö.
To switch to the speakerphone while using the headset:
•Each time you press (EXIT), the call will switch to the headset or speakerphone. While in the speakerphone mode, “EXIT=Headset” is displayed.
•During a conversation using the headset, you can switch the call to the handset by lifting it off the cradle.
•If you disconnect the headset during a conversation, you can continue the conversation with the speakerphone.
50