Panasonic KX-TG2650NZN, KX-TG2650ALN Set group On IH G=Next, Tom Jones F=Edit H=Save Tom Jones

7	To turn the call group feature on, select
	“On” by pressing Ü or á.

If not required, select “Off”.

•When “On” is selected, the display will light in orange and a different ringer pattern will be heard. When “Off” is selected, an ordinary ringer pattern will be heard.

Set group

:On

IH G=Next

8 Press Ö (Next key).

•If you want to change the storing name, number or group setting, press Ñ (Edit key) repeatedly to reach the desired display and change it.

9 Press á (Save key).

•A beep sounds.

•To continue storing other items, repeat from step 2.

•To return to the standby mode, press (OFF).

Tom Jones 0987654321

F=Edit H=Save

Tom Jones 0987654321

•If a pause is required for dialling, (REDIAL/PAUSE) can be stored in a phone

number in step 5. This counts as one digit (p. 46).

•You can exit the programming mode any time by pressing (OFF).

•If the display shows “Directory full” in step 2, press (OFF). To erase other stored items from the directory, see page 43.

•After the maximum of 90 items has been stored, “Directory full” is also displayed.

•If 3 beeps sound and the display shows “Save error”, move closer to the base unit and start again from step 1.

For New Zealand Users:

Your telephone company may charge you for a local call if the

number dialled has the area code prefix included. If the charge for local call is unacceptable, only the 7-digits of the local number should be dialled from your telephone. Do not dial the “0” prefix or the area code digit.

Advanced Operation

37