Storing caller information into the phonebook

Press {V} or {^} to enter the caller list.

Caller ID Service

Editing a caller’s phone number before calling back

You can edit a phone number in the caller list by removing its area code and/or the long distance code “1”.

2 Press {V} or {^} repeatedly to display the desired item.

3 Press {Edit} repeatedly until the phone number is shown in the desired format. Each time you press {Edit}, the phone number will be rearranged into one of 3 patterns.

1Local phone number Example: 321-5555

2Area code – Local phone number

Example: 555-321-5555

31 – Area code – Local phone number

Example: 1-555-321-5555

4 To return a call, press {C} or {s}.

Caller ID number auto edit feature

Once you call back an edited number (see “Editing a caller’s phone number before calling back”), the unit can automatically edit other incoming phone numbers each time you receive a call.

For example, you can use this feature to set the unit to ignore the area code of callers in your area code, so that you can call these local numbers using caller information without dialing the area code. To activate this feature, you must edit an item in the caller list (see “Editing a caller’s phone number before calling back”), then call that number. After that, calls from that caller’s area code will be edited automatically.

This feature can be turned on or off (page 40). The default setting is ON.

Note:

LThe handset can remember up to 4 area codes to be edited. Phone numbers from the 4 most recently edited area codes will be automatically edited.

LThis feature will not be activated until edited numbers are called back.

LIf you move to another area, you can turn this feature off to erase previously edited area codes. To use this feature again, turn it on and reprogram the area codes you want to edit once again.