Panasonic KX-TG5453 General use, Programmable settings, Problem Cause & solution

	Useful Information
Troubleshooting
General use
Problem	Cause & solution
The unit does not work.	LMake sure that the battery is installed correctly (page
	10).
	LCheck the connections (page 9).
	LFully charge the battery (page 11).
	LClean the charge contacts and charge again (page 11).
	LUnplug the base unit’s AC adaptor to reset the unit.
	Reconnect the adaptor and try again.
	LRe-install the battery (page 10) and fully charge it.
The display shows “No	LThe handset is too far from the base unit. Move closer
link to base. Move	and try again.
closer to base, try	LPlug in the base unit’s AC adaptor.
again.” and an alarm	LRaise the base unit antennas.
tone sounds.	LIf the above remedies do not solve the problem, the
	handset may have lost communication with the base
	unit. Register the handset again (page 43).
I cannot hear a dial tone.	LConfirm that the telephone line cord is connected (page
	9).
	LDisconnect the unit from the telephone line and connect
	a known working telephone. If the working telephone
	operates properly, contact our service personnel to
	have the unit repaired. If the working telephone does
	not operate properly, contact your telephone company.
Programmable settings
Problem	Cause & solution
I cannot program items.	LProgramming is not possible while the handset and
	base unit are being used.
	LDo not pause for over 1 minute while programming.
	LMove closer to the base unit.
	LWhile another user is listening to messages or the
	answering system is answering a call, you cannot
	program. Try again later.
While programming, the	LA call is being received. Answer the call and start again
handset starts to ring.	from the beginning after hanging up.

For assistance, please call 1-800-211-PANA (7262). 61