Caller ID Service
Caller ID number auto edit feature
Once you call back an edited number (see “Editing a caller’s phone number before calling back” on page 35), the unit can automatically edit other incoming phone numbers each time you receive a call. For example, you can use this feature to set the unit to ignore the area code of callers in your area code, so that you can call these local numbers using caller information without dialing the area code. To activate this feature, you must edit an item in the caller list (see “Editing a caller’s phone number before calling back” on page 35), then call that number. After that, calls from that caller’s area code will be edited automatically.
This feature can be turned on or off (page 52). The default setting is ON.
Note:
LThe handset can remember up to 4 area codes to be edited. Phone numbers from the 4 most recently edited area codes will be automatically edited.
LThis feature will not be activated until edited numbers are called back.
LIf you move to another area, you can turn this feature off to erase previously edited area codes. To use this feature again, turn it on and reprogram the area codes you want to edit once again.
Storing caller information into the phonebook
Items in the caller list can be stored into each handset’s phonebook.
1 Press {CID} (left soft key).
2 Press {V} or {^} repeatedly to display the desired item.
LTo edit the number, press {EDIT} repeatedly until the number is shown in the desired format (see “Editing a caller’s phone number before calling back” on page 35, step 3).
3 Press {SAVE}.
LIf there is no name information for the caller, “Enter name” will be displayed.
1Enter the name if necessary (see page 28, step 3).
2Press {NEXT}, then press {SAVE}.
LTo continue storing other items, repeat from step 2.
4 Press {OFF}.
Note:
LIf the caller information does not include a phone number, you cannot store it in the phonebook.
Erasing caller information
Erasing a selected item
1 Press {CID} (left soft key).
2 Press {V} or {^} repeatedly to display the desired item.
3 Press {CLEAR}.
LTo erase other items, repeat from step 2.
LTo exit the caller list, press {OFF}.
Erasing all items
Make sure that you have no missed calls. 1 Press {CID} (left soft key).
2 Press {ERASE} or {CLEAR}.
L“All erase?” will be displayed. LTo cancel erasing, press {NO}.
3 Press {YES}.
36For assistance, please visit http://www.panasonic.com/consumersupport
