Programmable Settings
Handset key tone
You can select whether or not key tones are heard when keys are pressed. Includes confirmation tones and error tones.
1
2
3 Scroll to “Key tone”, then press {SELECT}.
4 Press {V} or {^} repeatedly to select “On” or “Off”.
5 Press {SAVE}, then press {OFF}.
Auto talk
When this feature is turned on, you can answer a call by lifting the handset off the base unit or charger without pressing
{C}.
1
2
3 Scroll to “Auto talk”, then press {SELECT}.
4 Press {V} or {^} repeatedly to select “On” or “Off”.
5 Press {SAVE}, then press {OFF}.
Note:
LIf you subscribe to Caller ID service and want to view the caller’s information on the handset display after lifting up the handset to answer a call, turn off this feature.
Handset interrupt tone
This tone lets you know when you receive a call while you are on an intercom call or monitoring a room.
“2”: The tone will sound 2 times.
“On”: The tone will sound for as long as the line rings.
“Off”: Turns this feature off.
1
2
3 Scroll to “Interrupt tone”, then press {SELECT}.
4 Press {V} or {^} repeatedly to select the desired setting.
5 Press {SAVE}, then press {OFF}.
Handset display language
You can select either “English” or “Español” as the display language.
1 Press {MENU} (middle soft key).
2 Scroll to N, then press {SELECT}.
3 Scroll to “Change language”, then press {SELECT}.
4 Press {V} or {^} repeatedly to select the desired language.
5 Press {SAVE} or {GUARDAR}, then press {OFF}.
Note:
LIf you select a language you cannot read, press {MENU} {#} {1} {1} {0} {1} {SAVE} to change the display language to English.
Flash time
The flash time depends on your telephone exchange or host PBX.
You can select: “90ms” (milliseconds), “100ms”, “110ms”, “250ms”, “300ms”, “400ms”, “600ms”, or “700ms”.
1 Press {MENU} (middle soft key).
2 Scroll to N, then press {SELECT}.
3 Scroll to “Set tel line”, then press {SELECT}.
For assistance, please visit http://www.panasonic.com/consumersupport | 53 |