Panasonic KX-TG5583 operating instructions Room monitor, Monitoring a room, Setting room monitor

			Intercom Features
Room monitor			Monitoring a room
This feature allows you to listen in on a			Important:
			LBefore monitoring, make sure the unit to
room where the handset or base unit is
			be monitored is not in use.
located. The monitored extension will not
			LThe handset to be monitored must be off
ring, allowing you to easily monitor, for
example, a baby’s room from different			the base unit.
areas of the house. If you want to prevent			LIf you receive a phone call while
your unit from being monitored by other			monitoring a room, you will hear 2 tones
extensions, leave this feature OFF			(page 53, 55). To answer the call with the
(default).		{		}			{C}
			handset, press OFF , then press
			or {s}. To answer the call with the base
Setting room monitor			unit, press {SP-PHONE} 2 times.
			Monitoring with the handset
Turning on/off the handset’s room
			1 Press {INTERCOM}, then press
monitor feature
This allows the handset to be monitored.			{MONITOR}.
1	Press {MENU} (middle soft key).		2 To call the base unit, press		{	}
						0 .
2	Scroll to N, then press {SELECT}.		To call another handset, press its
			extension number ({1} to {8}).
3	Scroll to “Room monitor”, then press
			LYour handset will start to monitor the
	{SELECT}.		room through the destination unit.
4	Press {V} or {^} repeatedly to select		LTo monitor from the speaker, press
			{s}. To switch back to the receiver,
5	“On” or “Off”.		press {C}.
	Press {SAVE}, then press {OFF}.		3 To end monitoring, press {OFF}.
			LThe base unit user can stop being
Turning on/off the base unit’s room
			monitored by pressing {INTERCOM}
monitor feature
			or {SP-PHONE}. The monitored
This allows the base unit to be monitored.
			handset user can stop being
This feature must be set by using the
			monitored by pressing {OFF}.
handset.
			Note:
1	Press {MENU} (middle soft key).
			LThe monitored handset displays “Room
2
	Scroll to N, then press {SELECT}.		monitor”.
3	Scroll to “Set base unit”, then press
	{SELECT}.
4	Scroll to “Room monitor”, then press
	{SELECT}.
5	Press {V} or {^} repeatedly to select
6	“On” or “Off”.
	Press {SAVE}, then press {OFF}.
	For assistance, please visit http://www.panasonic.com/consumersupport							41