Panasonic KX-TG5583 General use Problem Cause & solution, Link to base. Move, Closer to base, try

Models: KX-TG5583

1 96
Download 96 pages 48.04 Kb
Page 81
Image 81

 

Useful Information

 

 

 

 

Troubleshooting

 

 

 

General use

 

 

 

Problem

Cause & solution

The unit does not work.

LMake sure that the battery is installed correctly (page

 

12).

 

LCheck the connections (page 11).

 

LFully charge the battery (page 13).

 

LClean the charge contacts and charge again (page 13).

 

LUnplug the base unit’s AC adaptor to reset the unit.

 

Reconnect the adaptor and try again.

 

LThe handset has not been registered to the base unit.

 

Register the handset (page 56).

 

LRe-install the battery (page 12) and fully charge it.

The display shows “No

LThe handset has lost communication with the base unit.

link to base. Move

Move closer to the base unit, and try again.

closer to base, try

LConfirm that the base unit’s AC adaptor is plugged in.

again.” and an alarm

LRaise the base unit antennas.

tone sounds.

LThe handset’s registration may have been canceled.

 

Re-register the handset (page 56).

 

 

I cannot hear a dial tone.

LConfirm that the telephone line cord is connected (page

 

11).

 

LDisconnect the unit from the telephone line and connect

 

a known working telephone. If the working telephone

 

operates properly, contact our service personnel to

 

have the unit repaired. If the working telephone does

 

not operate properly, contact your telephone company.

 

 

The handset displays the

LThe handset has lost communication with the base unit

incorrect time.

(because the base unit’s AC adaptor is not connected

 

or the handset is out of range). Confirm that the base

 

unit’s AC adaptor is connected and move the handset

 

closer to the base unit.

 

 

Programmable settings

 

 

 

Problem

Cause & solution

I cannot program items.

LProgramming is not possible while the handset and

 

base unit are being used.

 

LDo not pause for over 1 minute while programming.

 

LMove closer to the base unit.

 

LWhile another user is listening to messages or the

 

answering system is answering a call, you cannot

 

program. Try again later.

 

 

For assistance, please visit http://www.panasonic.com/consumersupport

81

Page 81
Image 81
Panasonic KX-TG5583 operating instructions General use Problem Cause & solution, Link to base. Move, Closer to base, try