Caller ID Service
3 Press {Edit} repeatedly until the phone number is shown in the desired format.
1Local phone number
Example: 321-5555
2Area code – Local phone number
Example:
31 – Area code – Local phone number
Example:
4 {C}
Caller ID number auto edit feature
Once you call back an edited number, the unit can automatically edit other incoming phone numbers each time you receive a call.
For example, you can use this feature to set the unit to ignore the area code of callers in your area code, so that you can call these local numbers using caller information without dialing the area code. To activate this feature, you must edit an item in the caller list, then call that number. After that, phone numbers from that caller’s area code are edited automatically. This feature can be turned on or off (page 32).
Note:
LPhone numbers from the 4 most recently edited area codes are automatically edited.
LIf you move to another area, you can turn this feature off to erase previously edited area codes. To use this feature again, turn it on and reprogram the area codes you want to edit once again.
Storing caller information into the phonebook
1 Press {^} or {V} to enter the caller list.
2 Select the desired item. i{Select}
LTo edit the number, press {Edit} repeatedly until the phone number is shown in the desired format.
3 {Save}
LIf there is the name information for the caller, skip to step 5.
4 Enter the name (see the character table, page 23). i{Next} i{Save}
5 {OFF}
Erasing selected caller information
1 Press {^} or {V} to enter the caller list. 2 Select the desired item.
3 {Erase} i{Yes} i{OFF}
Erasing all caller information
1 Press {^} or {V} to enter the caller list. 2 {All erase} i{Yes}
For assistance, please visit http://www.panasonic.com/phonehelp | 29 |
