Panasonic KX-TG5664 operating instructions Multicolor Ring count

Programming

Feature	Feature	Setting code	System
	code		setting
Ring color	{1}{4}	{1}: <Color1>=Amber	–
(Ringer indicator color)		{2}: Color2=Green
		{3}: Color3=Red
		{4}: Multicolor
Ring count	{0}{6}{1}	{2}–{7}: 2–7rings <4>	r
		{0}: Toll saver
Ringer tone (Handset)*3	{1}{2}	{1}–{3}: Tone <1>–3	–
		{4}–{7}:Melody 1–4
Ringer volume (Handset)	{1}{1}	{1}: Low {2}: Medium	–
		{3}: <High> {0}: off
Set dial mode	{0}{5}{1}	{1}: Pulse	r
		{2}: <Tone> (page 17)
Set flash time*4	{0}{5}{2}	{1}: <700ms> {2}: 600ms	r
		{3}: 400ms {4}: 300ms
		{5}: 250ms {6}: 110ms
		{7}: 100ms {8}: 90ms
Set line mode*5	{0}{5}{3}	{1}: A {2}: <B>	r
Time adjustment*6	{0}{9}	{1}: <Caller ID[auto]>	r
(Caller ID subscribers only)		{0}: Manual
Voice enhancer	{5}	{1}: On {0}: <Off>	–

*1 If you subscribe to Caller ID service and want to view the caller’s information after lifting up the handset to answer a call, turn off this feature.

*2 You can select whether or not key tones are heard when keys are pressed. Includes confirmation tones and error tones.

*3 If you subscribe to a distinctive ring service (such as IDENTA-RING), select a tone (tone 1 to 3). If you select a melody, you cannot distinguish lines by their ringers.

*4 The flash time depends on your telephone exchange or host PBX. Consult your PBX supplier if necessary. The setting should stay at “700ms” unless pressing {FLASH} fails to pick up the call waiting call.

*5 Generally, the line mode setting should not be adjusted. If “Line in use” is not displayed when another phone connected to the same line is in use, you need to change the line mode to “A”.

*6 This feature allows the unit to automatically adjust the date and time setting when caller information is received. To use this feature, set the date and time first.

For assistance, please visit http://www.panasonic.com/phonehelp 33