Panasonic KX-TG6021NZ Battery recharge Problem Cause/solution, Making/answering calls, intercom

	Useful Information
Battery recharge
Problem	Cause/solution
I fully charged the battery,	LClean the charge contacts and charge again
but 7continues to flash,	(page 10).
or 8 is displayed.	LThe battery may need to be replaced with a new
	one (page 10).
The handset display is	LConfirm that the battery is properly installed.
blank.	LFully charge the battery (page 10).
While charging, the charge	LThe battery is empty. The charge indicator does
indicator does not light and	not light in order to concentrate on charging.
“Charge for 7h” is	After about 5 minutes, the charge indicator lights
displayed.	and “Charging” is displayed.
Making/answering calls, intercom
Problem	Cause/solution
Static is heard, sound cuts	LMove the handset and base unit away from
in and out. Interference	other electrical appliances.
from other electrical units.	LMove closer to the base unit.
	LTurn on the clarity booster feature (page 17).
	LYour unit is connected to a telephone line with
	ADSL (JetStream) service. We recommend that
	you contact your ADSL service provider to have
	an ADSL Splitter installed. We do not
	recommend the use of generic ADSL filters.
	Contact your ADSL provider for details.
The handset does not ring.	LThe ringer volume is turned off. Adjust it (page
	25).
I cannot make a call.	LAnother handset is in use. Try again later.*1
	LIf the above remedy does not solve the problem,
	set the dialling mode. Press {MENU} {0} {5}
	{1} {Save} {OFF}.
	LThe unit is not designed to be used with rotary
	(pulse dialling) services.
I cannot have a	LMake sure that an optional headset is
conversation using the	connected properly (page 32).
headset.	LIf “SP-phone” is displayed on the handset,
	press {C} to switch to the headset.
I cannot page the handset.	LThe called handset is too far from the base unit.
	LThe called handset is in use. Try again later.
*1 KX-TG6022

35