Panasonic KX-TG6021NZ Setting up the base unit, Setting up the handset, Connecting the AC adaptor

Preparation

Setting up the base unit

Connecting the AC adaptor and telephone line cord

Connect the telephone line cord until it clicks into the base unit and telephone line socket (A). Connect the AC adaptor cord (B) by pressing the plug firmly (C).

LUse only the included Panasonic AC adaptor PQLV203AL.

	ATo single-line
B	telephone socket
C	(230–240 V AC,
	50/60 Hz)
Hooks

Note:

LThe AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.)

LThe AC adaptor should be connected to a vertically oriented or floor- mounted AC outlet. Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of the adaptor may cause it to become disconnected.

LThe unit will not work during a power failure. We recommend connecting a corded telephone to the same telephone line or to the same telephone socket using a BT double adaptor.

LThe unit is not designed to be used with rotary (pulse dialling) services.

If you subscribe to an ADSL service

Please attach a noise filter (contact your ADSL provider) to the telephone line between the base unit and the telephone line socket in the event of the following:

–Noise is heard during conversations.

–Caller ID features do not function properly.

To single-line telephone socket

Noise filter

Setting up the handset

Connecting the AC adaptor

Available model:

KX-TG6022

LUse only the included Panasonic AC adaptor PQLV208AL.

(230–240 V AC, 50/60 Hz)

Bottom of the charger

Hooks

Hooks

Fasten the AC adaptor cord to prevent it from being disconnected.

9