| Useful Information |
|
|
Problem | Cause/solution |
I cannot operate the | L Someone is using the unit. Wait for the other user |
answering system. | to finish. |
| L A caller is leaving a message. Wait for the caller to |
| finish. |
| L The handset is too far from the base unit. Move |
| closer. |
I cannot operate the | L You are entering the wrong remote access code. If |
answering system | you forgot the remote access code, store a new |
remotely. | remote access code (page 34). |
| L Press each key firmly. |
| L The answering system is turned off. Turn it on |
| (page 35). |
| L You are using a rotary/pulse telephone. Try again |
| using a |
While recording a greeting | L A call is being received. Answer the call and try |
message or listening to | again later. |
messages, the unit rings |
|
and the operation stops. |
|
|
|
Liquid damage |
|
|
|
Problem | Cause/solution |
Liquid or other form of | L Disconnect the AC adaptor and telephone line |
moisture has entered the | cord from the base unit. Remove the batteries |
handset/base unit. | from the handset and leave to dry for at least 3 |
| days. After the handset/base unit are completely |
| dry, reconnect the AC adaptor and telephone line |
| cord. Insert the batteries and charge fully before |
| use. If the unit does not work properly, contact an |
| authorized service center. |
Caution:
LTo avoid permanent damage, do not use a microwave oven to speed up the drying process.
For assistance, please visit http://www.panasonic.com/help | 49 |
