Panasonic KX-TG6434 Answering calls, Using the handset, Adjusting the base unit ringer volume

Making/Answering Calls

L While on a call, you can switch from the base unit to the handset:

–Press {C} on the handset, then press {SP-PHONE} on the base unit.

–If the handset is on the base unit, simply lift it.

Adjusting the speaker volume

Press {^} or {V} repeatedly while talking.

Redialing the last number dialed {SP-PHONE}i{REDIAL}

Answering calls

Using the handset

When a call is being received, the ringer indicator flashes rapidly.

1Lift the handset and press {C} or {s} when the unit rings.

L You can also answer the call by pressing any dial key from {0} to

{9}, {*}, or {#}. (Any key answer feature)

2When you finish talking, press

{OFF} or place the handset on the base unit or charger.

Auto talk

You can answer calls simply by lifting the handset off the base unit or charger. You do not need to press {C}. To turn this feature on, see page 22.

Adjusting the handset ringer volume Press {^} or {V} repeatedly to select the desired volume while the handset is ringing for an incoming call.

Note:

L You can also program the handset ringer volume beforehand (page 23).

Temporary handset ringer off

While the handset is ringing for a call, you can turn the ringer off temporarily by pressing {~}.

Adjusting the base unit ringer volume

Press {^} or {V} repeatedly to select the desired volume.

L To turn the ringer off, press and hold {V} until the unit beeps 2 times.

Note:

L When the ringer volume is set to off, the base unit rings at the low level for intercom calls. (KX-TG6441 series: page 3)

Using the base unit

Available for:

KX-TG6441 series (page 3)

When a call is being received, the SP- PHONE indicator flashes rapidly.

1Press {SP-PHONE} when the unit rings.

2Speak into the MIC.

3When you finish talking, press {SP- PHONE}.

For assistance, please visit http://www.panasonic.com/help 15