Panasonic KX-TG6411 Registering a unit, Operating additional units, Programming, Select, Menu

Programming

4{V}/{^}: “Call block” i

{SELECT}

5{V}/{^}: “Yes” i{SELECT} i{OFF}

■By entering phone numbers:

1{MENU} i{#}{2}{1}{7} i

{ADD}

2Enter the phone number (32 digits max.).

L To erase a digit, press

{CLEAR}.

3{SAVE} i{OFF}

Block calls without phone number You can reject a call without phone number including “Out of area”, “Private caller”, or “Long distance”.

1 MENU 2 4 0

Registering a unit

Operating additional units

Additional handsets

Up to 6 handsets can be registered to the base unit.

Important:

L See page 5 for information on the available model.

Registering a handset to a base unit

The supplied handset and base unit are pre-registered. If for some reason the handset is not re-registered to the base unit, register the handset.

{	} i{#}{ }{ }{ }
2 {V}/{^}: Select the desired setting.

1 Handset:

re-register

i{SAVE} i{OFF}

Viewing/editing/erasing call block numbers

1{MENU} i{#}{2}{1}{7}

2{V}/{^}: Select the desired entry. L To exit, press {OFF}.

3Proceed with the desired operation.

■Editing a number:

{EDIT} iEdit the phone number. i{SAVE} i{OFF}

■Erasing a number:

{ERASE} i{V}/{^}: “Yes” i{SELECT} i{OFF}

Note:

L When editing, press the desired dial key to add, {CLEAR} to erase.

LWhen viewing, {w/o NUM} appears if the block calls without phone number feature is turned on. To turn the feature off: {w/o NUM} i{V} i

{SAVE} i{OFF}

{MENU} i{#}{1}{3}{0}

2 Base unit:

■ KX-TG6411 series: page 3 Press and hold {LOCATOR} for about 4 seconds. (No registration tone)

■ KX-TG6421 series: page 3 Press and hold {LOCATOR} for about 4 seconds until the registration tone sounds.

L If all registered handsets start ringing, press the same button to stop. Then repeat this step.

L The next step must be completed within 90 seconds.

3Handset:

Press {OK}, then wait until a long beep sounds.

4{OFF}

26For assistance, please visit http://www.panasonic.com/help