Useful Information
Problem | Cause/solution |
|
While programming, the | L A call is being received. Answer the call and start |
|
handset starts to ring. | again after hanging up. |
|
I cannot register a handset | L The maximum number of handsets (6) is already |
|
to a base unit. | registered to the base unit. Cancel unused |
|
| handset registrations from the base unit (page |
|
| 27). |
|
| L Place the handset and the base unit away from |
|
| other electrical appliances. |
|
|
|
|
Battery recharge |
|
|
|
|
|
Problem | Cause/solution |
|
The handset beeps and/or | L Battery charge is low. Fully charge the batteries |
|
) flashes. | (page 9). |
|
I fully charged the batteries, | L Clean the charge contacts and charge again |
|
but ) still flashes or 0is | (page 10). |
|
displayed. | L It is time to replace the batteries (page 9). |
|
I fully charged the batteries, | L Clean the battery ends (S, T) and the charge |
|
but the operating time | contacts with a dry cloth and charge again. |
|
seems to be shorter. |
|
|
|
|
|
Making/answering calls, intercom | ||
|
|
|
Problem | Cause/solution |
|
_ is displayed. | L The handset is too far from the base unit. Move |
|
| closer. |
|
| L The base unit’s AC adaptor is not properly |
|
| connected. Reconnect AC adaptor to the base |
|
| unit. |
|
| L You are using the handset or base unit in an area |
|
| with high electrical interference. |
|
| base unit and use the handset away from |
|
| sources of interference. |
|
| L The handset is not registered to the base unit. |
|
| Register it (page 26). |
|
44For assistance, please visit http://www.panasonic.com/help
