Useful Information
5Connect the telephone line cord. Mount the unit by inserting the mounting pins into the round openings on the adaptor (for pin 2, use the round cut out at the bottom of the adaptor if you are using the 4 inch phone plate), then slide the unit down to secure it. Connect the AC adaptor to power outlet (page 9). L There are 2 common types of wall
phone plates. The distance between 1 and 2 may vary depending on the size of the wall phone plate installed.
| 1 |
|
| 83 mm | |
| (31/ | inches) |
| 4 |
|
| or |
|
| 102 mm | |
| (4 inches) | |
| 2 |
|
| (120 V AC, | |
| 60 Hz) | |
83 mm | 102 mm |
|
(31/4 inches) | 1 (4 inches) |
|
| 2 |
|
To remove the wall mounting adaptor
While pushing down the release levers (A), remove the adaptor (B).
A 
A
B
Charger
1Drive the screws (not supplied) into the wall.
25.4mm
(1 inch)
Screws
(120 V AC, 60 Hz)
2Mount the charger (A), then slide it down (B) and to the right (C) until it is secure.
A
B 
C
For assistance, please visit http://www.panasonic.com/help | 41 |
