Panasonic KX-TG6500 Line14, Preparing the Answering System Number of Rings Handset, Toll saver

Preparing the Answering System

Number of Rings Handset

You can select the number of times the unit rings before the Answering System answers a call, from “2” to “7” or “Toll saver”*. Each line has its own setting. The factory preset for both lines is “4”.

1Press [MENU].

2	Scroll to “Initial setting” by pressing
						Initial setting
	[d] or [B], then press the soft key (				).
				SELECT
3	Press the soft key (		) at “Set
		SELECT				Set answering
	answering”.
4	Press the soft key (		) at “Number of
		SELECT				Number of rings
	rings”.
5	Press [d] (Line1) or [B] (Line2) to select
						Number of rings
	the line.					d=Line1 B=Line2
6	Select the number of rings by pressing [d]
						Number of rings
	or [B].					Line1:4
	• You can also select the number of rings by
	pressing [0] (Toll saver*), or [2] to [7].

7Press the soft key ( SAVE ).

• To select the other line, repeat from step 4.

8Press [OFF].

*Toll saver

When you call a line to which “Toll saver” has been set, from a remote location, the number of rings will tell you if there are any new messages. If the unit answers on the 2nd ring, there is at least 1 new message. If the unit answers on the 4th ring, there are no new messages. To save the toll charges for the call, hang up immediately when you hear the 3rd ring. The 3rd ring indicates that there are no new messages.

Preparation

For assistance, please call: 1-800-211-PANA(7262)

31