Y

Making and Answering Calls using the Handset

12
Making calls
1Lift the handset and dial the phone number.
LTo correct a digit, press {CLEAR}.
2Press {CALL} or {C}.
LThe unit selects the default line configured
by your administrator.
LYou can also select the line manually as
follows:
{LINE} i {V}/{^}: Select the desired line.
i {CALL}
3When you finish talking, press {OFF} or place
the handset on the charger.
Note:
LIf y is displayed during the call, other units may
join the conversation (page 14, 18). Contact
your administrator for further information.
LA maximum of 3 lines can be used at a time.
LTo use the optional headset, plug the headset
into the headset jack before performing step 1.
Using the speakerphone
1Dial the phone number and press {s}.
LThe unit selects the default line configured
by your administrator.
LYou can also select the line manually as
follows:
{LINE} i {V}/{^}: Select the desired line.
i {s}
LSpeak alternately with the other party.
2When you finish talking, press {OFF}.
Note:
LFor best performance, use the speakerphone in
a quiet environment.
LTo switch back to the receiver, press {C}.
Adjusting the receiver or speaker volume
Push the joystick up or down repeatedly while
talking.
Making a call using the redial list
The last 10 phone numbers dialed are stored in the
redial list (each 32 digits max.).
1{REDIAL}
2{V}/{^}: Select the desired phone number.
3{C}/{s}
LIf {s} is pressed and the other party’s line is
engaged, the unit automatically redials
multiple times. While the handset is waiting
to redial, the ringer indicator flashes. To
cancel, press {OFF}.
Editing/erasing/storing a number in the redial list
1{REDIAL}
2{V}/{^}: Select the desired phone number. i
{MENU}
3Proceed with the desired operation.
■Editing a number before calling:
{V}/{^}: “Edit and Call” i {SELECT}
i Use the joystick to move the cursor. i
Edit the number. i Press {CALL} or
{C}.
■Erasing a number:
{V}/{^}: “Erase” i {SELECT} i
{V}/{^}: “Yes” i {SELECT} i {OFF}
■Storing a number to the phonebook:
{V}/{^}: “Save phonebook” i
{SELECT} i To store the name, continue
from step 3, “Editing entries”, page 21.
Note:
LWhen editing:
– To erase a number, place the cursor on the
number, then press {CLEAR}.
– To insert a number, place the cursor to the
right of where you want to insert the number,
then press the appropriate dial key.