:
Phonebook using the Base Unit (KX-TGP550 only)
23
Using the phonebook
The phonebook allows you to make calls without
having to dial manually. You can add 100 names
and phone numbers to the phonebook.
Adding entries
1{C} (left soft key)
2{ADD}
3Enter the party’s name (16 characters max.).
i {OK}
4Enter the party’s phone number (32 digits
max.). i {OK}
LIf you do not need to assign the ringer ID, go
to step 7.
5{V}/{^}: “Set Ringer ID” i {SELECT}
6{V}/{^}: Select the desired setting (page 42).
i {OK}
7{SAVE}
LTo add other entries, repeat from step 3.
8{EXIT}
Note:
LIn step 2, you can also press {MENU}. i
{V}/{^}: “New entry” i {SELECT}
LIf you select “No Ringer ID” (default), the unit
uses the ringer tone you selected on page 34
when a call is received from that caller.
Character table for entering names
While entering characters, you can switch
between uppercase and lowercase by pressing
{*}.
LTo enter another character that is located on the
same dial key, press {>} to move the cursor to
the next space.
Correcting a mistake
Press {<} or {>} to move the cursor to the
character or number you want to erase, then press
{CLEAR}. Enter the appropriate character or
number.
LPress and hold {CLEAR} to erase all characters
or numbers.
Finding and calling a phonebook entry
Scrolling through all entries
1{C} (left soft key)
2{V}/{^}: Select the desired entry.
3Lift the corded handset.
LYou can also select the line manually as
follows:
{LINE} i {V}/{^}: Select the desired line.
i Lift the corded handset.
Searching by first character
(alphabetically)
1{C} (left soft key)
2Press the dial key ({0} – {9}, or {#}) which
contains the character you are searching for
(page 23).
Key Character
{1}Space # & ’ ( )
;,–./1
{2}ABC2
abc2
{3}DEF3
def3
{4}GHI 4
ghi4
{5}JKL5
jkl5
{6}MNO6
mno 6
{7}PQRS7
pqrs7
{8}TUV8
tuv8
{9}WXY Z 9
wxyz9
{0}Space 0
{#} #
Key Character