Y
Phonebook using the Handset
20
Using the phonebook
The phonebook allows you to make calls without
having to dial manually. You can add 100 names
and phone numbers to the phonebook.
Adding entries
1{MENU} (center of joystick)
2{V}/{^}: “Phonebook” i {SELECT}
3{ADD}
4Enter the party’s name (16 characters max.).
i {OK}
5Enter the party’s phone number (32 digits
max.). i {OK}
LIf you do not need to assign the ringer ID, go
to step 8.
6{V}/{^}: “Set Ringer ID” i {SELECT}
7{V}/{^}: Select the desired setting (page 42).
i {OK}
8{SAVE}
LTo add other entries, repeat from step 4.
9{OFF}
Note:
LIn step 3, you can also press {MENU}. i
{V}/{^}: “New entry” i {SELECT}
LIf you select “No Ringer ID” (default), the unit
uses the ringer tone you selected on page 28
when a call is received from that caller.
Character table for entering names
While entering characters, you can switch
between uppercase and lowercase by pressing
{*}.
LTo enter another character that is located on the
same dial key, push the joystick right to move
the cursor to the next space.
Correcting a mistake
Use the joystick to move the cursor to the
character or number you want to erase, then press
{CLEAR}. Enter the appropriate character or
number.
LPress and hold {CLEAR} to erase all characters
or numbers.
Finding and calling a phonebook entry
Scrolling through all entries
1{MENU} (center of joystick)
2{V}/{^}: “Phonebook” i {SELECT}
3{V}/{^}: Select the desired entry.
4{C}
LYou can also select the line manually as
follows:
{LINE} i {V}/{^}: Select the desired line.
i Press {CALL} or {C}.
Searching by first character
(alphabetically)
1{MENU} (center of joystick)
2{V}/{^}: “Phonebook” i {SELECT}
Key Character
{1}Space # & ’ ( )
;,–./1
{2}ABC2
abc2
{3}DEF3
def3
{4}GHI 4
ghi4
{5}JKL5
jkl5
{6}MNO6
mno 6
{7}PQRS7
pqrs7
{8}TUV8
tuv8
{9}WXY Z 9
wxyz9
{0}Space 0
{#} #
Key Character